LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Macan Base >> Repair and Diagnosis >> Drivelines & Axles >> Wheel Hubs >> 40 Front Wheel Suspension, Drive Shafts -- (95B) MACAN >> WM 408519 Removing And Installing Front Spring Strut (Except MACAN Sport Edition) >> Removing And Installing Front Spring Strut >> Removing front spring strut

Removing front spring strut

  1. Vehicles with PASM  : Remove PASM connector.
    G11983866

    PASM connector 

    1. 1.1. Loosen connector and release line from the holder -1-  .
    2. 1.2. Release and disconnect connector -2-  .
  2. Support the wheel bearing housing to prevent the wheel bearing housing from tilting.
    G11983867

    Mounting for support T10149 

    1. 2.1. Turn the wheel hub in such a way that a bore for a wheel bolt is at the top.
    2. 2.2. Support T10149  must be secured to the wheel hub with a wheel bolt -arrow- 
    3. 2.3. Support T10149  must now be fitted into the transmission jack WE 1082  .
  3. Separate threaded joint -1-  on the wheel bearing housing at the top.
    NOTE:

    The slots in the wheel bearing housing must not be widened using a chisel or similar tool!

  4. Pull the two pins for the upper trailing arm -2-  out of the wheel bearing housing.
    G11983868

    Mounting for upper trailing arm 

  5. Unscrew fastening screws -1 to 4-  on the mounting saddle at the top.
    G11983869

    Upper spring-strut mount 

  6. Vehicles with PASM  : Unscrew fastening screws -1-  and remove mounting saddle -2-  from the spring strut -3-  .
    G11983870

    Mounting for mounting saddle 

scientia non olet · About LEMON Manuals