Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening screws | Step 1, cross-strut to front-axle carrier | Initial tightening | 90 Nm (67 ftlb.) | ||
| Fastening screws | Step 2, cross-strut to front-axle carrier | Final tightening | +135° | ||
| Front fastening screw | Step 1, cross-strut to front-axle carrier | Initial tightening | 90 Nm (67 ftlb.) | ||
| Fastening screw | Step 2, Cross-strut to front-axle carrier | Final tightening | +90° |