Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Connecting link to anti-roll bar | AM10 thread/always use new screws and nuts following removal | Initial tightening | 40 Nm (30 ftlb.) | ||
| Connecting link to anti-roll bar | AM10 thread/always use new screws and nuts following removal | Final tightening | +90° | ||
| Connecting link to spring strut | M10 x 45 thread/always use new screws or bolts following removal | Initial tightening | 40 Nm (30ftlb.) | ||
| Connecting link to spring strut | M10 x 45 thread/always use new screws or bolts following removal | Final tightening | +90° |