Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Connecting link to anti-roll bar | AM10 thread/always use new screws and nuts following removal | Initial tightening | 40 Nm (30 ftlb.) | ||
| Connecting link to anti-roll bar | AM10 thread/always usenew screws and nuts following removal | Final tightening | +90° | ||
| Anti-roll bar clamp to front-axle carrier | M8 thread/always use new nut following removal | Tightening torque | 30 Nm.(22ftlb.) |