Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Upper trailing arm to wheel bearing housing | M10 thread | Tightening torque | 45 Nm (33 ftlb.) | ||
| Upper trailing arm to mounting saddle | M10 thread/always use new screws or bolts and nuts following removal | Initial tightening | 50 Nm (37 ftlb.) | ||
| Upper trailing arm to mounting saddle | M10 thread/always use new screws or bolts and nuts following removal | Final tightening | +90° |