Removing Rear Closing Panel

Fig 1: Rear Closing Panel Component Location

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installation position of rear closing panel

Information:  Drill out the connection point on one side only. Do not damage the plate underneath.

1. Drill out spotwelds using spotweld drill  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Removing rear closing panel

2. Heat the marked bonding surfaces.
   1. 2.1. Removing rear closing panel

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Removing rear closing panel