Installing Brake Master Cylinder
- Installation is performed in reverse order.
Observe specified tightening torques:
- Brake master cylinder to brake booster: Tightening torque 49 Nm (36 ftlb.)
- Brake lines to brake master cylinder (left-hand drive vehicles): Tightening torque 14 Nm (10.5 ftlb.)
- Brake lines to brake master cylinder (right-hand drive vehicles): Tightening torque 18 Nm (13 ftlb.)
- Brake fluid reservoir to brake master cylinder: Tightening torque 5 Nm (3.5 ftlb.)