LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Macan Base >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 63 Bumpers -- (95B) MACAN >> WM 635019 Removing And Installing Rear Bumper (Except MACAN Sport Edition) >> Installing Rear Bumper

Installing Rear Bumper

NOTE:
  • The self-locking nuts and screws must always be replaced  .
NOTE:
  • There must be no underbody protection, sealing material or wax at the screw-on points  .
  1. Installation is performed in reverse order to removal.
  2. Tighten the bumper to Tightening torque 40 Nm (30 ftlb.)  until secure.
scientia non olet · About LEMON Manuals