Removing Rear Wheel Housing Liner

Information: 

• The number of fastening screws, fixing clips, plug connections, holders and trim panels can vary depending on equipment  .
• The illustrations for removing and installing the drive mechanism are shown only on one equipment variant and may differ from the actual equipment variant  .
• Some steps must be carried out automatically  .
• Some of the repair illustrations show only one side of the vehicle  .

1. Unscrew fastening screws -2  -.
2. Unscrew and remove fastening nuts -1  -.
3. Loosen and remove wheel housing liner -3  -.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Rear right wheel housing liner