Removing D-Pillar Reinforcement

Fig 1: D-Pillar Reinforcement Component Location

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installation position of D-pillar reinforcement

Information:  Drill out the connection point on one side only. Do not damage the plate underneath.

1. Drill out spotwelds using spotweld drill   .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Removing D-pillar reinforcement

2. Heat the bonding surfaces.
   1. 2.1. Remove D-pillar reinforcement.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Removing D-pillar reinforcement