Removing Side Section Lower Part

Fig 1: Side Section Lower Component Location

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installation position of side section lower part

Information:  Drill out the connection point on one side only. Do not damage the plate underneath.

1. Drill out spotwelds using spotweld drill  .
   1. 1.1. Drill out spotweld -A  - from the inside.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Removing side section lower part

2. Heat the marked bonding surfaces.
   1. 2.1. Make a sufficient gap between the side section -1  - and side section lower part -2  - (-arrows  -).
   2. 2.2. Remove side section lower part.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Removing side section lower part