Subsequent Work

1. Install roof. Refer to WM 510355 REPLACING ROOF (WITH SLIDING ROOF)  or WM 510355 REPLACING ROOF (WITHOUT SLIDING ROOF) .

Subsequent Work For Body Repairs (Without Straightening System 

1. Clean joint areas and sheetmetal flanges with a wire brush.
2. Prime joint areas and sheetmetal flanges with 2K primer.
3. Restore standard seal with body sealant. Refer to WM 5X00IN SEAM SEALS .
4. Paint repair area and adjacent surfaces, if necessary.
5. Restore standard underbody protection with underbody sealant. Refer to WM 5X00IN UNDERBODY PROTECTION .
6. Apply standard cavity preservation. Refer to WM 5X00IN CAVITY PRESERVATION . Also apply cavity preservation to the repair area.
7. Install removed accessories in the repair area.

Model year as of 2014