LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (40 - Wheel Suspension Front Drive Shaft (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 405019 Removing And Installing Front Wheel Bearing Housing (Wheel Carrier) >> Tools

WM, 405019 Removing And Installing Front Wheel Bearing Housing (Wheel Carrier): Tools

WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Tool denomination Type Tool number Image
puller hook Special tool > 9229
G16329376Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Spring tensioner VW tool > VW552
G16329377Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Puller set Vehicle-specific workshop equipment > VAS 6926
G16329378Courtesy of PORSCHE CARS NORTH AMERICA, INC.
ball joint puller VW tool > T10444
G16329379Courtesy of PORSCHE CARS NORTH AMERICA, INC.
ball joint puller VW tool > T10187
G16329380Courtesy of PORSCHE CARS NORTH AMERICA, INC.
fitting tool VW tool > T10206
G16329381Courtesy of PORSCHE CARS NORTH AMERICA, INC.
screwdriver Special tool > 9546
G16329382Courtesy of PORSCHE CARS NORTH AMERICA, INC.