Generator And Starter

WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Generator Components Location

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Generator

TIGHTENING TORQUE SPECIFICATIONS

1	Generator
2	Screw, M8 x 95 > Tightening torque 23 (7 ftlb.) Nm -- dang --
3	Screw, M8 x 35 > Tightening torque 23 (7 ftlb.) Nm -- dang --
4	Bores for screws, M8 x 95
A	View

TIGHTENING TORQUE SPECIFICATIONS

Location	Description	Type	Basic value
Nut for B+ line to generator	M8 - Item 1	Tightening torque	15 Nm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. B+ line at the generator
Screw on generator	M6	Tightening torque	10 (7.5 ftlb.) Nm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Holder for three-phase generator lines
Screws securing crash console to three-phase generator	M6 - Item 4	Tightening torque	10 Nm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Crash console
Screw securing ground cable to generator	M8 - Item 1	Contact force	20 Nm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Securing ground strap on generator

Fig 2: Starter Components Location With Torque Specifcation

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Starter

TIGHTENING TORQUE SPECIFICATIONS

1	Starter; Start Stop starter is larger
2	Screw, M10 x 45 > Tightening torque 45 (33 ftlb.) Nm -- dang --

TIGHTENING TORQUE SPECIFICATIONS

Location	Description	Type	Basic value	Tolerance
Nut securing B+ line to starter		Tightening torque	18 Nm
Nut for electric line to starter		Tightening torque	6.5 Nm