Installing Cowl For Throttle Housing (Y-Pipe)
WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
- The components are installed in reverse order to removal.
- Screw-type clamps > Tightening torque 5.5 (4 ftlb.) Nm -- dang --
- The pressure and intake pipes must be checked to ensure they are seated securely after being fitted (check by pulling on the pipes).