LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (20 - Fuel Supply, Actuator (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 204819 Removing And Installing Leakage Diagnosis Pump (LDP) >> Installing Leakage Diagnosis Pump (LDP)

Installing Leakage Diagnosis Pump (LDP)

WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check rubber flange -3-  for damage and replace it if necessary.
    G16310134Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Installing leakage diagnosis pump

    1 Leakage diagnosis pump
    2 Carbon canister
    3 Rubber flange
    4 Air hose
    5 Fastening screws
  2. Fit rubber flange -3-  on the connection piece on the leakage diagnosis pump and fit leakage diagnosis pump -1-  on the carbon canister -2-  (-B-  ).
  3. Screw in three fastening screws.
  4. Fit air hose -4-  on the leakage diagnosis pump -1-  (-B-  ).
scientia non olet · About LEMON Manuals