Installing Engine Guard

WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Installation is performed in reverse order. Pay particular attention to the following:

Tighten screws on rear part of engine guard -4 and 5- .
> Tightening torque 9 (6.5 ft lb.) Nm

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Loosening rear fastening screws
Tighten screws on front part of engine guard at the rear -2- and front -3- .
> Tightening torque 9 (6.5 ft lb.) Nm

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Loosening front fastening screws
Tighten screws on front part of engine guard at the sides -1- .

> Tightening torque 9 (6.5 ft lb.) Nm

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Loosening side fastening screws