Fitting Engine Support

WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Information

The engine needs to be suspended on an assembly support for certain repair work.

Remove right engine support arm. To do this, loosen the four fastening screws > Fastening screws

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fastening screws
Fit the engine support > 3269 - engine support. Make sure the mounting shaft is positioned centrally in the longitudinal direction of the engine. Fit the fastening screws. > Tightening torque 45 (33 ft lb.) Nm

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Engine support
Lift the engine with the workshop crane and secure it on the assembly support. To do this, guide the engine support straight into the assembly support WE 1171 or a similar support, without tilting it.