LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Cayenne Turbo >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> 70 - Linings, Insulation -- 92A Cayenne >> WM 706919 Removing And Installing D-Pillar Trim Panel (Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Removing D-Pillar Trim Panel

Removing D-Pillar Trim Panel

CAUTION:
  • Risk of damage to electric wires and head airbag.

→ When unclipping the trim panel using a tool, make sure not to damage the electric wires lying behind it and the head airbag.

  1. Unclip D-pillar trim panel -circles-  from the D-pillar at the marked areas.
    1. 1.1. Lift trim panel slightly at position -A-  .
    2. 1.2. Lever out fastening clips using a plastic wedge.
      Fig 1: Identifying D-Pillar Trim Panel
      G09940747Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Loosen expansion rivet and remove rebound strap on the body.