LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Cayenne Turbo >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> 70 - Linings, Insulation -- 92A Cayenne >> WM 702219 Removing And Installing Cover Under Dashboard (Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Removing Cover Under Dashboard

Removing Cover Under Dashboard

Information 

Information 

To reduce the unclipping forces and thereby the risk of damage during removal, the removal steps must be carried out at the accessible connection points using a suitable tool.

Fig 1: Identifying Cover Under Dashboard Installation Position
G09940672Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Unscrew and remove fastening screw -2-  .
  2. Pull cover under dashboard -1-  out of the locks and swivel it down -A-  .
  3. Pull cover under dashboard -1-  out of the guides -3-  (-B-  ).
    Fig 2: Removing Mounting Screw Of Trim Panel Under Dashboard
    G09940673Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Release electric plug connection for light -a-  and disconnect it -A-  .
    Fig 3: Disconnecting Connector For Light
    G09940674Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  5. Passenger's side only:  Release electric plug connection for plug socket -a-  and disconnect it -A-  .
    Fig 4: Disconnecting Connector At Socket
    G09940675Courtesy of PORSCHE CARS NORTH AMERICA, INC.