Preparing Connection Areas Of The Body For Installing Rear Trunk Floor Panel

Clean welding and sealing areas.

Fig 1: Identifying Connection Areas Of Body For Installing Rear Trunk Floor Panel
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fig 2: Identifying Body Welding And Sealing Areas
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
1. 1.1. Clean the body connecting flanges of underbody protection, adhesive residue and paint in the marked areas.
2. 1.2. Grind the connecting flanges until bare on both sides.
Coat all spot-weld flange areas with zinc powder paint.