Installing Front Grab Handles

Information 

• Some of the repair illustrations show only one side of the vehicle. 
• Naturally, some steps also have to be performed on the opposite side of the vehicle as well. 

1. Fit grab handle -1-  .
   Fig 1: Fitting Grab Handle

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Screw in fastening screws -3-  and tighten to Tightening torque 5.5 Nm (4 ftlb.)  .
   Fig 2: Securing Grab Handle

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
3. Close covers -2-  .
   Fig 3: Identifying Covers

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Information 

   The handle must return itself to a normal position after it is released!

4. Check fold-in function.
   Fig 4: Folding In Grab Handle

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.