LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Cayenne Turbo >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> 68 - Interior Equipment -- 92A Cayenne >> WM 681119 Removing And Installing Glove Compartment Lock (Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Removing Glove Compartment Lock

Removing Glove Compartment Lock

  1. Unscrew and remove fastening screws -1-  from the handle -3-  in the glove compartment cover -2-  .
    Fig 1: Identifying Screws For Glove Compartment Cover
    G09940345Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Remove handle -3-  from glove compartment cover -2-  .
    NOTE: Lock cylinder removed and installed incorrectly
    • Risk of damage to lock cylinder

    → Do not take the ignition key out of the lock cylinder during removal and installation. Otherwise, the spring-loaded locking elements will spring out of the lock cylinder.

  3. Insert ignition key -5-  fully into the lock cylinder. This locks the locking elements in the lock cylinder.
    Fig 2: Removing Lock Cylinder
    G09940346Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Press three catches -6-  on the lock cylinder -4-  outwards -A-  .
  5. Pull lock cylinder -4-  with ignition key -5-  out of the handle -3-  .
scientia non olet · About LEMON Manuals