Drive Shaft
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| No. 1: Threaded connection securing drive shaft to wheel hub (1st step) | This is done before installing the wheel bearing housing/M24 x 1.5 thread/always replace lock nut following removal | Tightening torque | 130 Nm (96 ftlb.) | ||
| No. 1: Threaded connection securing drive shaft to wheel hub (2nd step) | This is done with the wheel bearing housing fitted/M24 x 1.5 thread/always replace lock nut following removal | Tightening torque | 460 Nm (340 ftlb.) |