Installing Air Deflector For Sliding Roof

Information 

• Some of the repair illustrations show only one side of the vehicle. 
• Naturally, some steps also have to be performed on the opposite side of the vehicle as well. 

On a new air deflector, the sliding channel for the spring -2-  and the bearing pin -1-  for the bearing must be greased.

Fig 1: Identifying Spring And Bearing Pin Of Air Deflector

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Grease: → GREASE 958.564.902.00

1. Guide the air deflector forward with the rubber stops under the roof.
2. Guide the air deflector springs into the sliding channel.
3. Press the air deflector arms down and insert the bearing pin -1-  into the air deflector bearing.
   Fig 2: Installing Air Deflector

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
4. Check the power function of the air deflector and make sure that the vibration damper (tab in the middle) is facing upwards.