Installing Padding For 2/3-Split Folding Rear Seat
- Plug in existing electric plug connections -1, 2-
for the 2/3-split folding seat -A, B-
and lock them -a, b-
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Information
Fastening grommets on the locking mechanism for the padding on the seat frame will be damaged irreparably during removal. Always replace the fastening grommets during installation.
- Fit new fastening grommets -3- .
- Position the padding -2-
for the 2/3-split folding rear seat.
Check that the padding and the carpet inlay around the belt locks are seated correctly.
- Clip in the retaining eyelets -1-
on the padding -2-
at the front by pressing them down firmly -arrows-
into the fastening grommets -3-
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
The retaining eyelets must engage securely in the fastening grommets.