Installing Lock For 2/3-Split Folding Rear Backrest
- Install the lever -2-
for the locking mechanism.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- 1.1. Fit the joint on the retaining pin -3-
and check that it engages securely.
- 1.2. Screw in fastening screw -1-
for the locking mechanism and tighten to → Tightening torque: 20 Nm (15 ftlb.)+/-2 Nm (+/-1.5 ftlb)
.
- Install left trim panel on 2/3-split folding rear seat.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- 2.1. Guide the trim panel into position on the seat from above and engage it securely at the clips.
- 2.2. Screw in fastening screw and tighten to → Tightening torque: 2 Nm (1.5 ftlb.).
- Slide the handle -1-
of the locking mechanism onto the lever -2-
until the locking lug engages securely -3-
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.