Installing Lock For 1/3-Split Folding Rear Backrest
- Fit the joint -1-
of the locking mechanism onto the pin -2-
and check that it engages securely.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Install the lever for the locking mechanism.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- 2.1. Carefully clip the lever -1-
for the locking mechanism onto the locking lug -2-
on the locking mechanism joint.
- 2.2. Screw in fastening screw -3-
for the locking mechanism and tighten to → Tightening torque: 20 Nm (15 ftlb.)+/-2 Nm (+/-1.5 ftlb)
.
- Install right trim panel on 1/3-split folding seat.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- 3.1. Guide the trim panel -2- into position on the seat from above and engage it securely at the clips -3-
.
- 3.2. Screw in fastening screw -1-
and tighten to → Tightening torque: 2 Nm (1.5 ftlb.).
- Slide the handle -1-
of the locking mechanism onto the lever -2-
until the locking lug engages securely -3-
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.