Installing 1/3-Split Folding Rear Seat

Position 1/3-split folding rear seat in the vehicle.
Tighten all fastening screws -1 - 4- hand-tight.
WARNING:
Incorrect handling of safety bolts
- Danger of injury
- Loss of torque
→ Always use new fastening screws and nuts following removal.

→ Observe specified tightening torques.

→ Carry out a visual inspection of all re-used parts.
Observe tightening sequence 1...4 .

Fig 1: Identifying Tightening Sequence
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Tighten M12 fastening screws at the rear -1 and 2- to → Tightening torque: 50 Nm (37 ftlb.)+/-7.5 Nm (+/-5.5 ftlb.) .
Tighten M10 fastening screws at the front -3 and 4- to → Tightening torque: 50 Nm (37 ftlb.)+/-7.5 Nm (+/-5.5 ftlb.) .
Clip electric plug connection -2- into the bracket.

Fig 2: Removing Electric Plug Connections For 1/3-Split Folding Rear Seat
Courtesy of PORSCHE CARS NORTH AMERICA, INC.