Removing Lumbar Support

Fig 1: Identifying Lumbar Support Installation Position

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Release and disconnect electric plug connections for lumbar support adjustment motor -1- and lumbar curvature motor -2- (-a- ).

Fig 2: Disconnecting Connectors For Motors
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Drill out blind rivets -3- using a suitable drill bit.

Fig 3: Drilling Out Blind Rivets
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Fold the lumbar support up -arrow A- and press the retaining bars -4- at the left and right together.
Disengage retaining bars -4- from the backrest frame -arrow B- .

Fig 4: Removing Lumbar Support
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Remove the complete lumbar support from the backrest frame.