LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Cayenne GTS >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> 72 - Seat Frames -- 92A Cayenne >> WM 721919 Removing And Installing Front Backrest Frame (Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Preliminary Work

Preliminary Work

Information 

The required preliminary work and subsequent work can vary depending on equipment.

The instructions provided in the document are for vehicles with the maximum possible equipment.

  1. Remove side cover for backrest and disengage rear cover for backrest at the underside of the seat. → 722619 REMOVING AND INSTALLING COVER FOR BACKREST 
  2. Remove front seat trim panel, without storage tray. → 721619 REMOVING AND INSTALLING FRONT SEAT TRIM PANEL 
  3. Disconnect pressure line (red) under the seat. → 723819 REMOVING AND INSTALLING CONTROL VALVE FOR AIR CUSHION 
  4. Disconnect wire harness for side airbag at the underside of the seat. → 696319 REMOVING AND INSTALLING FRONT SIDE AIRBAG
  5. On vehicles with heated seats:  Unplug electric plug connection for seat heating for backrest and disconnect wire harness. → 741719 REMOVING AND INSTALLING PADDING FOR FRONT BACKREST
scientia non olet · About LEMON Manuals