LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Cayenne Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 10 - Engine - Crankcase, Suspension -- 92AAB1 Cayenne S (3.6L) >> WM, 103719 Removing And Installing Torque Support >> Installing Torque Support

Installing Torque Support

  1. Install torque support.
    1. Use new screws and nuts.
    2. Place torque support in installation position.
    3. Insert screws and screw on the nuts.
    4. Tighten screws to > Initial tightening 20 Nm (15 ftlb.)  ↓ > Final tightening 180°  ↓ and counter at the nuts.
scientia non olet · About LEMON Manuals