Removing Dashboard Inset At The Bottom

Information 

To reduce the unclipping forces and thereby the risk of damage during removal, the removal steps must be carried out at the accessible connection points using a suitable tool.

1. Unclip locks -1-  from the dashboard inset at the bottom.
2. Unclip locks -2-  from right to left.
   Fig 1: Identifying Dashboard Screws

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
3. Release and disconnect electric plug connection on ignition starter switch light -A-  .
   Fig 2: Removing Connector From Ignition Starter Switch

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
4. Release electric plug connection on temperature sensor -a-  and disconnect it -A-  .
   Fig 3: Removing Temperature Sensor Connector

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.