Removing Oil Feed Line For Turbocharger

NOTIFICATION 

Mixing fluids 

• Risk of damage to components 
  • → Close off all openings immediately after exposing them (with adhesive tape, suitable stoppers).

Information 

• O-rings must always be replaced. 
• O-rings must be coated lightly with Kluber Syntheso Glep. 

1. Loosen holder -1  - for electric line -2  - at the oil line.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

2. Remove oil feed line for turbocharger -1  -.
   1. 2.1 Unscrew screw -2  - on the cylinder head -4  -.
   2. 2.2 Unscrew screws -3  - on the connections.
   3. 2.3 Unscrew screw -5  - using tool > VAS 6959 - Torx screwdriver insert T30  .
   4. 2.4 Disconnect oil line -1  - at the top of the cylinder head -4  -.
   5. 2.5 Disconnect oil line -1  - at the turbocharger -6  -.
   6. 2.6 Guide out oil line -1  - and remove it in an upward direction.
   7. 2.7 Collect emerging oil.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.