LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Turbo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 61 (21 Exhaust Gas Turbocharging 3.0L Turbo -- 971 - PANAMERA (971)) >> WM, 213019 Removing And Installing Turbocharger (V6 MONOTURBO) >> Subsequent Work

Subsequent Work

WARNING: This page is about a different variant/trim than selected.
  1. Install oxygen sensor.

    > Removing and installing oxygen sensor upstream of catalytic converter (V6 monoturbo) 

  2. Install pressure pipe.

    > WM, 214119 REMOVING AND INSTALLING PRESSURE PIPE (V6 MONOTURBO) 

  3. Install intake pipe.

    > WM, 212419 REMOVING AND INSTALLING INTAKE MANIFOLD (V6 MONOTURBO) 

  4. Fill in coolant and bleed the cooling system.

    > WM, 193817 DRAINING AND FILLING COOLANT

  5. Install heat shield for turbocharger.

    > Removing and installing heat shield for turbocharger (V6 biturbo and monoturbo) 

  6. Install engine cover (design cover).

    > WM, 108319 REMOVING AND INSTALLING ENGINE COVER (DESIGN COVER) (V6 TURBO)

scientia non olet · About LEMON Manuals