LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Turbo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 61 (21 Exhaust Gas Turbocharging 3.0L Turbo -- 971 - PANAMERA (971)) >> WM, 213019 Removing And Installing Turbocharger (V6 MONOTURBO) >> Preliminary Work

Preliminary Work

WARNING: This page is about a different variant/trim than selected.
  1. Remove engine cover (design cover).

    > Removing and installing engine cover (design cover) (V6 biturbo) 

  2. Remove heat shield for turbocharger.

    > Removing and installing heat shield for turbocharger (V6 biturbo and monoturbo) 

  3. Loosen oxygen sensor.

    > Removing and installing oxygen sensor upstream of catalytic converter (V6 monoturbo) 

  4. Remove intake manifold.

    > Removing and installing intake manifold (V6 monoturbo) 

  5. Remove pressure pipe.

    > Removing and installing pressure pipe 

  6. Drain coolant.

    > Draining and filling coolant (includes bleeding) 

scientia non olet · About LEMON Manuals