Removing Intake Manifold

1. Disconnect positive crankcase ventilation hose -5-  .
   1. 1.1 Press release buttons on both sides and loosen adapters on oil mist separator -1-  and positive crankcase ventilation system -2- 
   2. 1.2 Press release buttons on both sides and loosen pressure pipe adapter -4-  .

      Information 

      The positive crankcase ventilation hose adapter is permanently connected to the intake manifold.

   3. 1.3 Do not disconnect intake manifold adapter -3-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Full load ventilation on turbocharger

2. Remove intake manifold -1-  .
   1. 2.1 Release and pull off vacuum line at the intake pipe -2-  .
   2. 2.2 Unscrew screws -3-  .
   3. 2.3 Remove intake pipe -1-  .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Intake manifold