Preliminary Work: Notes

WARNING: This page is about a different variant/trim than selected.

Raise the vehicle.
> 4X00IN LIFTING THE VEHICLE
Select brake pad change mode using > 9900 - PIWIS Tester 3 .
1. 2.1 Select → 'Brake electronics (PSM, incl. parking brake)' in the 'Control unit overview' and press F12 confirm your selection.
2. 2.2 Select 'Drive links/checks' → 'Start brake pad change mode' and start the procedure.
Remove rear brake shoe.
> 468320 REMOVING AND INSTALLING BRAKE SHOES