Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location |
Description |
Type |
Basic value |
Tolerance |
Tolerance |
| Oil-pressure sender |
Replace |
Initial tightening |
3 Nm (2 ftlb.) |
|
|
| Oil-pressure sender |
Replace |
Final tightening |
+ 45° |
|
|
| Screw-type clamp for pressure hose |
|
Tightening torque |
5.5 Nm (4 ftlb.) |
+/- 0.5 Nm (0.4 ftlb.) |
|