LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (70 Linings, Insulation - Wagon -- 971 - PANAMERA (971)) >> WM, 708419 Removing And Installing Roof Trim Panel >> Installing Roof Trim Panel

Installing Roof Trim Panel

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Information 

Fitting using impact tools is not permitted.

  1. Installation is performed in reverse order.
  2. Engage front and rear roof trim panel in the bodyshell and press up slightly at the rear until the Velcro fasteners engage.
  3. Screw in and tighten screws > Tightening torque 5.6 Nm (4 ftlb.)