Removing Upper Part Of B-Pillar Trim Panel

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Information

To reduce the forces during removal and thereby the risk of damage, a suitable tool must be used as a support during removal at accessible connection points.

Information

Move belt adjustment cover panel to its upper end position.
Set belt adjustment to upper end position.

Unclip upper part of B-pillar trim panel -1- at the sides -arrows- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Unclipping upper part of B-pillar trim panel at the sides
Unclip upper part of B-pillar trim panel -1- by pulling it towards the centre of the vehicle.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Unclipping upper part of B-pillar trim panel

Information

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Upper part of B-pillar trim panel
- When swivelling out the upper part of the B-pillar trim panel -1- , make sure not to damage the guide lugs -2 and 3- .
Swivel out upper part of B-pillar trim panel -1- and remove it by pulling it downwards.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Removing upper part of B-pillar trim panel
Feed the seat belt through the opening in the belt adjustment cover panel.