LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (70 Linings, Insulation - Wagon -- 971 - PANAMERA (971)) >> WM, 705819 Removing And Installing Dashboard Moulding On Driver's Side >> Installing Dashboard Moulding On Driver's Side

Installing Dashboard Moulding On Driver's Side

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order. Pay particular attention to the following:

    Tightening torque for screws for instrument cluster trim panel: > Tightening torque 1.5 Nm (1 ftlb.) 

    Tightening torque for screws for dashboard moulding on driver's side: > Tightening torque 1.5 Nm (1 ftlb.) 

scientia non olet · About LEMON Manuals