LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (70 Linings, Insulation - Wagon -- 971 - PANAMERA (971)) >> WM, 705819 Removing And Installing (Lower) Dashboard Moulding On Passenger's Side >> Removing (Lower) Dashboard Moulding On Passenger's Side

Removing (Lower) Dashboard Moulding On Passenger's Side

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Unscrew screws -2-  , unclip trim panel -3-  and carefully press it towards the steering wheel until (lower) dashboard moulding on passenger's side is accessible.
    G15874329Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Trim panel

  2. Unscrew screws -4-  .
    G15874330Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Screws

  3. Unscrew screws -5-  and unclip (lower) dashboard moulding on passenger's side -1-  .
    G15874331Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Screws

  4. Release and disconnect electric plug connection for air vent -6-  and remove (lower) dashboard moulding on passenger's side -1-  .
    G15874332Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Dashboard moulding on passenger's side (lower)