LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (70 Linings, Insulation - Wagon -- 971 - PANAMERA (971)) >> WM, 705719 Removing And Installing A-Pillar Trim Panel >> Installing A-Pillar Trim Panel

Installing A-Pillar Trim Panel

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Information 

Check fixing clips, retaining clips and expanding clips for damage and replace them if necessary.

Check that all fixing clips, retaining clips and expanding clips are fitted at the correct position.

  1. Move retaining clip -1-  on A-pillar trim panel -2-  as far as it will go -arrow-  .
    G15874323Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Retaining clip on A-pillar trim panel

  2. Clip rebound strap -1-  into mounting point on A-pillar trim panel.
    G15874324Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Rebound strap on A-pillar trim panel

  3. Fit and clip in A-pillar trim panel -1-  in the cut-out using retaining clip -2-  and fixing clips -3-  .
    G15874325Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    A-pillar trim panel