LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (70 Linings, Insulation - Wagon -- 971 - PANAMERA (971)) >> WM, 70391930 Removing And Installing Cover For Rear Lock Support >> Removing Cover For Rear Lock Support

Removing Cover For Rear Lock Support

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
G15874310Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installation position of cover for rear lock support

  1. Detach seal -2-  in the rear lock support cover area.
    G15874311Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Seal

    2 Unscrew and remove screws -1-  .

    G15874312Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Screws

  2. Unclip cover on rear lock support using a plastic spatula.
  3. Remove cover for rear lock support.