LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (55 Lids, Flaps - Coupe -- 971 - PANAMERA (971)) >> 5590 Rear Lid >> WM, 559037 Disassembling And Assembling Rear Lid >> Technical Values

Technical Values

WARNING: This page is about a different car, the 2023 Porsche Panamera and 2022 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Location Des... Type Basic val... Toleranc... Toleranc...
Rear lid adjusting element screw Item 1 Tightening torque 6 Nm (4.4 ftlb.)    
G15863046Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Screw for rear lid adjusting element
Rear cover ball pin Item 3 Tightening torque 23 Nm (17 ftlb.)    
G15863047Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Ball pin on rear lid
Nut on wiper motor holder Item 11 Tightening torque 8 Nm (5.9 ftlb.)    
G15863048Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Removing retaining bracket for windscreen wiper motor
Screw for water drain sleeve on spoiler drive Item 5 Tightening torque 4 Nm (3 ftlb.)    
G15863049Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Screw for water drain sleeve on spoiler drive