LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (55 Lids, Flaps - Coupe -- 971 - PANAMERA (971)) >> 5590 Rear Lid >> WM, 559037 Disassembling And Assembling Rear Lid >> Assembling Rear Lid

Assembling Rear Lid

WARNING: This page is about a different car, the 2023 Porsche Panamera and 2022 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Assembly is performed in reverse order.
  2. Screw in ball pin and tighten > Tightening torque 23 Nm (17 ftlb.) 
  3. Screw in and tighten nuts on wiper motor retaining bracket > Tightening torque 8 Nm (5.9 ftlb.) 
  4. Screw in and tighten screws in water drain sleeves > Tightening torque 4 Nm (3 ftlb.) 
  5. Screw in and tighten screws in adjusting element > Tightening torque 6 Nm (4.4 ftlb.) 
scientia non olet · About LEMON Manuals