LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (55 Lids, Flaps - Coupe -- 971 - PANAMERA (971)) >> 5557 Rear Lid Release >> WM, 555719 Removing And Installing Rear Lid Release >> Installing Rear Lid Release

Installing Rear Lid Release

WARNING: This page is about a different car, the 2023 Porsche Panamera and 2022 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order. Pay particular attention to the following:

Screw on and tighten nut securing rear lid release to rear lid > Tightening torque 4 Nm (3 ftlb.) 

scientia non olet · About LEMON Manuals