LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (55 Lids, Flaps - Coupe -- 971 - PANAMERA (971)) >> 5540 Side Section Flap >> WM, 554019 Removing And Installing Side Section Flap (Module) >> Removing Side Section Flap (Module)

Removing Side Section Flap (Module)

WARNING: This page is about a different car, the 2023 Porsche Panamera and 2022 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
G15862981Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installation position

  1. Disengage emergency release for side section flap (module) -1-  from the side trim panel -2-  .
    G15862982Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Emergency release for side section flap (module)

  2. Unclip clip -2-  on emergency release for side section flap (module) -1-  from the luggage compartment.
    G15862983Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Emergency release for side section flap (module)

  3. Guide out the emergency release cable for the side section flap (module) from the wheel housing.
  4. Remove water drain hose -1-  with rubber sleeve -2-  from the body and detach it from side section flap (module) -3-  .
    G15862984Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Water drain hose

  5. Loosen side section flap (module).
    G15862985Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Side section flap (module)

    1. 5.1 Loosen locking lug 2 through the bore in the body using a slotted screwdriver.
    2. 5.2 Loosen locking lug 3 by moving the side section flap (module).
    3. 5.3 Loosen locking lug 4 through the bore in the body using a slotted screwdriver.
    4. 5.4 Loosen locking lug 5 by moving the side section flap (module).
  6. Remove side section flap (module).
G15862986Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Removing side section flap (module)

  1. 6.1 Swivel side section flap (module) out of the body aperture until the electric plug connections are accessible.
  2. 6.2 Release and disconnect electric plug connections -1 and 2-  .
  3. 6.3 Remove side section flap (module).