Installing Cable For Front Lid Lock

WARNING: This page is about a different car, the 2023 Porsche Panamera and 2022 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Route cable for front lid lock -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Routing cable for front lid lock
1. 1.1 Guide cable for front lid lock -1- into the passenger compartment.
2. 1.2 Install grommet -2- in firewall.
Secure front lid lock cable -1- at the release mechanism.
1. 2.1 Insert front lid lock cable -1- into the bracket.
2. 2.2 Clip guide tube into the bracket.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Securing cable on release mechanism
Clip connection point for front lid lock cable/wing -3- into the holder -4- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Unclipping connection point for cable/wing
Secure front lid lock cable -1- to lower part of lock at the front.
1. 4.1 Clip driver into installation position.
2. 4.2 Clip front lid lock cable -1- into lower part of lock -arrow- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Clipping in cable at lower part of lock